![]() Any transponder chip for the immobiliser (starting of car) will not be programmed and must be done by a specialist. How to Start a BMW with a Key Fob Remotely To set this feature up, choose Car and then Settings on your in-vehicle touchscreen display. PLEASE NOTE: This programming procedure programs the remote control part of the key. If you have another key do the same button pressing within 30 seconds 5. Hold unlock button then press lock button 3 times, release unlock button.Ĥ. Turn key to position 1 five times very quickly 2. Key 2 then key 1, vs 1 then 2.Īlternate if you do not have a working remoteġ. If it does not work, try doing the keys in opposite order. Release the unlock button and the doors lock which confirms the operation.Ħ) Quickly repeat steps 4 & 5 for key #2 etc. Next action must take place within 30 seconds.Ĥ) Hold the key up near your left shoulder (this is so it is closer to the remote receiver antenna.ĥ) Hold down the unlock button and press the lock button 3 times. (No more than 5 seconds) to start the process. To do this procedure you need to have one working key and one key that needs to be programmed.Ģ) Turn on the ignition and turn off quickly. Doors will lock and unlock to show correct programming has occurred. Remove the key from ignition and press and hold the unlock button for 15 seconds during this time press the key lock button 3 times within 5 seconds.ĥ. Turn ignition to position 1 and back to off within 5 seconds.ģ. Working from within the vehicle and with the doors shutĢ. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
June 2023
Categories |